Product Introduction
YWT-20B Aluminum Alloy Production Line Complete Equipment
I. Equipment Composition:
- Tile-making production system (host with oil injection device) - 1 set
- Color spraying machine - 1 unit
- Glazing machine (with dust hood) - 1 unit
- Demolding machine - 1 unit
- Color matching machine - 1 unit
- Conveyor lines - 6 lines
- Electrical appliances (including equipment installation cables) - 1 set
- Tile molds - 5000 pieces (5000-8000 pieces)
- Ridge tile machine - 1 unit
- Ridge tile molds - 90 pieces; eave tile molds - 30 pieces; gutter tile molds - 10 pieces; 1 piece each for 3-way ridge tile mold, 4-way ridge tile mold, sloped ridge tile mold, large end cap mold, small end cap mold, and eave sealing tile mold
- Rotary disc - 1 unit
II. Main Technical Parameters of the Equipment:
- Production capacity: 8000 pieces/8 hours
- Installed capacity: 30KW
- Operating voltage: 380V
- Air pressure: 0.7-0.8Mpa
- Product specification: 420×330
III. Staff Allocation: 12 persons
| Serial Number | Item | Quantity | Serial Number | Item | Quantity |
|---|---|---|---|---|---|
| a | Host operation | 1 person | e | Finished tile inspection | 2 persons |
| b | Coloring and glazing | 1 person | f | Mixer operation | 2 persons |
| c | Color matching and inspection | 1 person | g | Supervisor and machine maintenance | 1 person |
| d | Semi-finished product shelving and demolding | 4 persons |
IV. User-prepared Facilities:
- Auxiliary equipment:
a. Vertical forced mixer (Model JH250) - 1 unit
b. Tile racks (96 tiles per rack) - 52 pieces
c. Manual hydraulic forklift (2T) - 1 unit
d. Air compressor (≥0.7m³) - 1 unit - Workshop: 336 m² (28m in length × 12m in width)
- Curing room: 48 m² (8m in length × 3m in width, 2 rooms, determined by tile mold configuration)
- Site area: 1000 m²