Product Introduction
I. Equipment Composition:
- Tile-making Production System (Hydraulic Main Machine) 1 set
- Color Spraying Machine 1 unit
- Glazing Machine 1 unit
- Conveyor Lines 3 pieces
- Color Mixing Machine 1 unit
- Electrical Appliances (Including Equipment Installation Cables) 1 set
- Ridge Tile Machine 1 unit
- Tile Molds 2,000 pieces
- 50 ridge tile molds, 20 eave tile molds, 10 gutter tile molds, 1 three-way ridge tile, 1 four-way ridge tile, 1 diagonal ridge tile, 1 large end cap, 1 small end cap, and 1 eave closure tile each
II. Main Technical Parameters of Equipment:
- Production Capacity: 3,000-5,000 (pieces/8 hours)
- Installed Capacity: 22KW
- Working Voltage: 380V
- Air Pressure: 0.7-0.8Mpa
- Product Specification: 420×330mm
III. Staff Allocation: 8 persons
| Serial No. | Project | Quantity | Serial No. | Project | Quantity |
|---|---|---|---|---|---|
| A | Main Machine Operation | 1 person | |||
| B | Color Mixing, Coloring, Glazing | 1 person | |||
| C | Semi-finished Product Shelving | 1 person | D | Tile Mold Placement | 1 person |
| E | Mixer Operation | 3 persons | F | Quality Inspection & Machine Maintenance | 1 person |
IV. Facilities to be Prepared by Users:
A. Auxiliary Equipment:
A. Auxiliary Equipment:
- Vertical Forced Mixer JH250 Type 1 unit
- Tile Racks (96 pieces/rack) 22 pieces
- Manual Hydraulic Forklift (2T) 1 vehicle
- Air Compressor (≥0.7m³) 1 unit
B. Workshop: 144m² (18m length × 8m width)
C. Curing Room: 36m² (6m length × 3m width)
D. Site: 500m²
C. Curing Room: 36m² (6m length × 3m width)
D. Site: 500m²