Product Introduction
YWT-12A Semi-automatic Production Line Complete Equipment
I. Equipment Composition:
- Tile-making production system (host hydraulic type) - 1 set
- Color spraying machine - 1 unit
- Glazing machine - 1 unit
- Conveyor line - 3 lines
- Color matching machine - 1 unit
- Electrical appliances (including equipment installation cables) - 1 set
- Ridge tile machine - 1 unit
- Tile molds - 2000 pieces (with a range of 200-4000 pieces)
- Ridge tile molds - 50 pieces; eave tile molds - 20 pieces; gutter tile molds - 10 pieces; 3-way ridge tile mold, 4-way ridge tile mold, sloped ridge tile mold, large end cap mold, small end cap mold, and eave sealing tile mold - 1 piece each
II. Main Technical Parameters of the Equipment:
- Production capacity: 3000-5000 pieces/8 hours
- Installed capacity: 22KW
- Operating voltage: 380V
- Air pressure: 0.7-0.8Mpa
- Product specification: 420×330
III. Staff Allocation: 7 persons
| Serial Number | Item | Quantity | Serial Number | Item | Quantity |
|---|---|---|---|---|---|
| a | Host operation | 1 person | d | Tile mold placement | 1 person |
| b | Color matching, coloring, glazing | 1 person | e | Mixer operation | 2 persons |
| c | Semi-finished product shelving | 1 person | f | Quality inspection & machine maintenance | 1 person |
IV. User-prepared Facilities:
- Auxiliary equipment:
a. Vertical forced mixer (Model JH250) - 1 unit
b. Tile racks (96 tiles per rack) - 22 pieces
c. Manual hydraulic forklift (2T) - 1 unit
d. Air compressor (≥0.7m³) - 1 unit - Workshop: 144 m² (18m in length × 8m in width)
- Curing room: 36 m² (6m in length × 3m in width)
- Site area: 500 m²